5
Maintenance and Repair
Hydrostatic implement carrier agria 5900 Cyclone
61
Steering bar centre screw
•
After every
200
operating hours, check the
steering bar centre screw (A/9). The steering
bar should rest on the steering tower without
any play, but still easily rotatable. Grease the
rotating/sliding surface as necessary.
- agria-Service -
Loading strap
Check for damage before each use and during
each maintenance work. Replace if necessary.
Replace after
10 years
at the latest.
Driving wheels
•
During
initial startup
and after
each wheel
change
, check and tighten the wheel bolts or
wheel nuts after the first
2
operating hours
and then during each service work and after
every
50
operating hours with
100 Nm
.
•
Check the tyre pressure of the wheels fre-
quently. For smooth driving ensure that the
tyre pressure in both wheels is the same.
Never exceed the maximum tyre pressure!
The max. tyre pressure is shown on the side
of the tyre.
There is a risk of explosion from ex-
cessive tyre pressure.
Only skilled specialists are allowed to repair and
change tyres, using suitable installation tools.
Summary of Contents for Cyclone 5900
