5
Maintenance and Repair
Hydrostatic implement carrier agria 5900 Cyclone
51
Exhaust system and speed governor
Regularly check the exhaust system (C/18), gov-
ernor lever, linkage and governor springs for soil-
ing and plant debris and clean with a brush or
compressed air if necessary.
Danger of fire - due
to dirty exhaust system!
Check before each start-up.
Replace damaged exhaust parts.
Handle hot engine components with caution!
The silencer and other engine parts get very hot
when the engine is running and are still hot di-
rectly after the engine is switched off. Keep a suf-
ficient distance from hot surfaces and keep chil-
dren away from the running engine.
Idle speed
Always ensure that the engine idle speed is adjusted correctly. With speed regulating
lever at idling, the engine should continue running smoothly.
- agria-Service -
All further maintenance and care of the engine
Engine operating
instructions
Petrol engine 23 HP
Check engine oil level
Before each start-up and after every 8 hours
of operation
•
Only with the engine switched off and on
level ground.
•
Clean the oil dipstick (C/7) and its environ-
ment.
•
Remove the oil dipstick, wipe it with a clean
cloth and reinsert it. Remove the oil dipstick
and check the oil level.
Summary of Contents for Cyclone 5900
