Agria 9600-112, Translation Of The Original Operating Instructions, Page: 25 / 92

3 Devices and Operating Elements
Remote-controlled High Grass Rotary Mulcher agria 9600-112 25
Power control module
The power control module converts the excess
generator energy of the electric motors into heat
during overrun operation via a brake chopper
module and thus prevents an overload of the elec-
tronic components.
H1 lights up (permanently when machine is switched on): A voltage of 48 V is applied
to the generator - if not, check either the line to the generator or the generator.
H2 lights up (permanently when switched on): A voltage of 12 V is applied to the
power electronics - if not, check the battery.
H3 lights up (only if the brake chopper module is active): Voltage is applied to the
power control module, for example when descending a slope without load.
Cutting height adjustment
The cutting height can be adjusted from 50 to 185
mm. The values are entered on the remote control
with the mowing deck up / down button (B/7), and
the linear drive (A/5) moves the mowing deck ac-
cordingly.
Make sure that no objects (tools, wood,
etc.) are located on the mowing deck during
lifting, as this could cause damage to the ma-
chine, especially the electric motors.