Agilent Technologies X3501-64005, User Manual

Page: 253 / 288

Technical Information
How to Use by Front Panel
17
Turbo-V 1KG Rack Controller User Manual / 87-901-045-01 253/288
Measures
Pressing once on the MEASURES pushbutton, the information is
displayed:

P=XXX W is the power absorbed by to the pump.

T=XX °C is the pump bearing temperature.

XXXX Hz is the rotational frequency of the pump.

I=X.XXA is the current absorbed by the pump.
On pressing the key again, the display goes back to main screen
If not otherwise specified the following status are showed with a
solid symbol (no blinking request). Not showed in programming.

PD Power Derating (blinking warning)

Purge when active shows the status of the PURGE
VALVE OPEN

Vent when active (blinking) the VENT VALVE is OPEN
or a CONTROLLER VENT BRAKING is active

HS Shows the high speed selection: the controller is at
HIGH SPEED.

LS Shows the low speed selection: the controller is at
LOW SPEED
S T A T U S X X X H z
M E A S U R E S
P = X X X W T = X X ° C
I = X . X X A
S T A T U S X X X H z
M O D E .
PD
Purge
Vent
HS
LS