Agilent Technologies U1840A Medalist sj5000, Hardware Manual

Page: 123 / 192

Setting Up Barcode Readers
10
Agilent U1840A Medalist sj5000 Hardware Manual 10-7
Align Barcode Reader
The barcode reader has to be properly aligned physically to
ensure that it captures good legible images from the target. This
can be done by using the Microscan ESP software which
provides a real-time visual environment for barcode alignment.
1
Load a board with a barcode in the desired location for
barcode detection.
2
Launch the Microscan ESP software and go into Camera
mode by clicking
Camera
.
3
Click
Test
.
The barcode reader will take a continuous shot and decode
the barcode.
4
Adjust the barcode reader until it achieves a good reading
(Percent Decode > 90%).
5
Fix the barcode reader position and click
Stop
to finish the
test.