Agilent Technologies TPS-compact, User Manual

Page: 203 / 240

Technical Information
Agilent TPS-compact User Manual 203
J5 – In-Out
Figure 61
This connector carries all the input and output signals to remote control the
TPS-compact.
It is a 15-pins D type connector; the available signals are detailed in the table, the
following paragraphs describe the signal characteristics and use.
Table 4
Pin N. Signal name Input/Output
1 START/STOP (+) IN
2 START/STOP (-) IN
3 ADAPTIVE SCROLL DRIVING DISABLE (+) IN
4 ADAPTIVE SCROLL DRIVING DISABLE (-) IN
5 SPEED SETTING (+) IN
6 SPEED SETTING (-) IN
7 SOFT START (+) IN
8 SOFT START (-) IN
9 +24 Vdc Imax = 30 mA OUT
10 NORMAL OUTPUT (relay contact)
Vmax = 125V
Imax = 200 mA
OUT
11 PROGRAMMABLE SET POINT OUT
12 NORMAL OUTPUT (relay contact) OUT
13 FAULT OUTPUT OUT
14 PROGRAMMABLE ANALOG SIGNAL (+) OUT
15
•
GROUND
•
PROGRAMMABLE ANALOG SIGNAL (-)
OUT