3
Getting Started
To access the cycler from another cycler
30
Agilent SureCycler 8800 Setup and User’s Guide
To access the cycler from another cycler
1
From the Home screen, press
Network Control
.
2
Press any of the six “Touch to Connect” squares on the screen.
A new screen will open.
3
Enter the IP address or cycler name of the instrument you want to
connect to into the
IP Address/Cycler
field.
4
Press
Connect
. You will be returned to the Network Control screen and
the network information and status of the connected instrument will be
displayed in the square.
5
Press the square for the connected instrument. You will be prompted to
login to the instrument.
6
Enter a valid
User Name
and
Password
to take over control of the
instrument remotely and press
Log In
. You are now operating the
software for the remotely connected instrument.
Summary of Contents for SureCycler 8800
