manualshive.com logo in svg

Agilent Technologies R Series, User Manual, Page: 75 / 220

Share
Download
Agilent Technologies R Series User Manual Download Page 75

41

Chapter 2: Unpacking and installing the workstation

BenchCel Microplate Handling Workstation R-Series User Guide

Connecting and disconnecting the air source

About this topic

Compressed air is used to move parts inside the BenchCel device. This 
topic explains how to connect the BenchCel device to the air source 
and check the connections for leaks before use.

Before you start

Make sure you have the supplied air tubing.

Connecting the air 
source

To connect the BenchCel device to the air source:

1.

Turn off the air at the source (house, cylinder, or pump).

2.

Connect one end of the air tubing to the air source (house, cylinder, 
or pump), and then connect the free end of the tubing to the quick 
disconnect fitting at the air-input port.

To connect the tubing, push the end of the tubing into the quick 
disconnect fitting at the air source and on the back of the BenchCel 
device.

The following diagram shows the air tubing connection on the back 
of the BenchCel device.

To air source (house, 
cylinder, or pump)

Summary of Contents for R Series





























































































































































































































Reviews:

No comments