Agilent Technologies R Series, User Manual

Page: 56 / 220

Chapter 1: Introduction
BenchCel Microplate Handling Workstation R-Series User Guide
22
Safety information
Introduction
This topic provides information for the safe operation of the BenchCel
Workstation.
Before using the
BenchCel
Workstation
Before using a BenchCel Workstation, your organization should make
sure that you are properly trained in:
❑
General laboratory safety
❑
The correct and safe operation of the BenchCel Workstation
❑
The correct and safe operation of other lab automation systems or
components used in combination with the BenchCel Workstation
If you are the person in your organization responsible for training others
on the BenchCel Workstation and you have a safety question, contact
Velocity11 Technical Support.
Safety standards
The BenchCel device is CE certified and complies with the following CE
safety directives:
❑
EN61326:1997, including Amendment 1:1998 (EMC)
❑
EN61010-1:1993, including Amendment 2:1995 (Safety)
Safety labels Pay attention to safety labels printed on your product. A safety label
consists of a warning symbol. A description of the warning and
information that will help you to avoid the safety hazard are located in
the user guide.
The following diagram shows an example of a warning label that
indicates risk of danger. It is located on the lower left and right sides of
the robot head.
F r o n t view
Side view