Agilent Technologies R Series, User Manual, Page: 48 / 220

Chapter 1: Introduction
BenchCel Microplate Handling Workstation R-Series User Guide
14
Integration options
About this topic
You can integrate Velocity11 and some third-party devices with the
BenchCel device to create a BenchCel Workstation. The BenchCel robot
can move microplates to and from these devices as specified by the
protocol you create.
This topic lists some of the devices that can be integrated in the
BenchCel Workstation.
Velocity11 devices You can integrate Velocity11 devices in the BenchCel Workstation. The
following diagram shows an example of a BenchCel Workstation that
consists of the BenchCel device, the PlateLoc Thermal Plate Sealer, and
the VCode Barcode Print and Apply Station.
The following Velocity11 devices can be integrated with the BenchCel
device:
:
PlateLoc Sealer
VCode
Microplate
Labeler
Integration plates
Device Description
PlateLoc Thermal Microplate
Sealer Applies seal on microplates.
VCode Barcode Print and
Apply Station Prints barcodes and applies the barcode
labels to microplates.
VPrep Pipetting System Dispenses liquids.