Agilent Technologies N9360A, Programming Manual

Page: 53 / 180

Programming Command Reference
5
N9360A Multi UE Tester W-CDMA Programming Manual 5-7
Application Select Commands
Application
APPLication:GSM
This command selects the GSM application (Agilent N9360A)
and displays the [Initial] screen of the GSM mode.
Preinstalled Option must be installed in the Tester.
APPLication:WCDMA
This command selects the W-CDMA application (Agilent
N9360A) and displays the [Initial] screen of the W-CDMA mode.
Preinstalled option must be installed in the Tester.
Configuration Screen Commands
Printer Control
CONFigure:PRINter PMG800|USBMemory
CONFigure:PRINter?
This command sets the output direction of the Print Screen. The
choices are
PMG800
and
USBMemory
. At preset, this is set to
PMG800
. This query command returns the output direction of
the Print Screen with strings.
Beeper Control
CONFigure:BEEPer ON|OFF|1|0
CONFigure:BEEPer?
This command sets the beep function to
ON
(1) or
OFF
(0). If this
is set to
ON
, there is beep for each step of operation. If this is set
to
OFF
, beep is suppressed except for some errors and warnings.
At preset, this is set to
ON
. This query command returns the
beep setting with integer value of
1
or
0
.
10MHz Reference Oscillator
CONFigure:ROSCillator INT|EXT