Agilent Technologies N9360A, Programming Manual

Page: 150 / 180

7-6 N9360A Multi UE Tester W-CDMA Programming Manual
7
Sample Program
Automatic Test Function
The Tester is configured to required setting for the test at the
beginning of this function. Then, the Tester executes the
signaling tests and RF tests on a channel. The PASS or FAIL test
results and measurement results are shown on the status field.
Operations by an operator for test are shown on the status field.
1
: Public Sub Automatic_Sample()
2
: Dim value
3
:
4
: ClrStatus
5
:
6
:' Tester Status
7
: value = Split(ENTER("*IDN?"), ",")
8
: AddStatus value(0)
9
: AddStatus value(1)
10
: AddStatus value(2)
11
: AddStatus value(3)
12
:
13
:' Configuration
14
: OUTPUT "*RST"
15
: OUTPUT "CONF:LOSS ON"
16
: OUTPUT "CONF:LOSS:RFIN
5.0,0.0,0.0,0.0,0.0,5.0"
17
: OUTPUT "CONF:LOSS:RFOU
5.0,0.0,0.0,0.0,0.0,5.0"
18
: OUTPUT "CONF:COND:3GPP 2"
19
: OUTPUT "CONF:SEQ:VAR:RFCH:CHAN1 1,9800"
20
: OUTPUT "CONF:SEQ:VAR:RFCH:CHAN2 6,4200"
21
:
22
:' Measure Setup
23
: OUTPUT "TEST:AUTO:SCR VAL"
24
:
25
:' Signaling Test
26
: OUTPUT "TRIG:IMM"
27
: AddStatus "Turn on the mobile phone. "