Agilent Technologies N5241A, Service Manual

Page: 238 / 354

6-80 Service Guide N5242-90001
Replaceable Parts PNA Series Microwave Network Analyzers
Replaceable Parts Listings N5241A/42A
Rear Panel Assembly, All Options
Item
Number
Part
Number Qty Description
A17
CPU board. The 2.0 GHz CPU board is shown. Refer to “Top Assemblies, All Options” on
page 6-14 for part number.
A51
Hard disk drive assembly (HDDA) for 2.0 GHz A17 CPU board. Refer to “Top Assemblies, All
Options” on page 6-14 for A51 part numbers.
➀
N5242-00022
1
Power supply rear panel (when 1.6 GHz CPU is installed)
N5245-00028 Power supply rear panel (when 2.0 GHz CPU is installed)
➁
0515-0372 28 Machine screw, M3.0 x 8, pan head
➂
Rear foot and screw (Refer to “External Hardware and Miscellaneous Parts, All Options” on
page 6-78 .)
➃
6960-0149 1 Hole plug
➄
N5242-00010 1 Rear panel
➅
2190-0034 2 Lock washer
➆
0380-0644 2 Jack screw
➇
2190-0584 6 Lock washer
➈
1251-7812 6 Jack screw
➉
N5242-60005 1 PWR I/O cable assembly
1810-0118 3 Termination, 50 ohm load
8121-0834 1 HANDLER I/O cable assembly
2190-0068 11 Lock washer
2950-0054 11 Hex nut
Bottom foot (Refer to “External Hardware and Miscellaneous Parts, All Options” on page 6-78 .)
Rear panel jumper (Refer to “Bottom RF Cables, 4-Port, Option 423 without Option 029 (Ports 1
and 2)” on page 6-60 or “Bottom RF Cables, 2-Port, Option 224 without Option 029” on
page 6-34 .)
2190-0102
2
Lock washer
2950-0035
2
Hex nut
6960-0076
2
Hole plug (For 2-port models only.)
11
12
13
14
15
16
17
18
19