Agilent Technologies N5230AU-974, Installation Note

Page: 3 / 30

Installation Note N5230-90022 3
Getting Assistance from Agilent
By internet, phone, or fax, get assistance with all your test and measurement needs.
Contacting Agilent
Assistance with test and measurements needs and information on finding a local Agilent
office are available on the Web at:
http://www.agilent.com/find/assist
If you do not have access to the Internet, please contact your Agilent field engineer.
NOTE
In any correspondence or telephone conversation, refer to the Agilent product by
its model number and full serial number. With this information, the Agilent
representative can determine whether your product is still within its warranty
period.
Description of the Upgrade
This upgrade extends the upper frequency limit of your 20 GHz configurable test set analyzer
(N5230A Option 225) to 40 GHz. This is done by installing Option F40. After installation of
this upgrade, your anlayzer will be an N5230A Option 425.
Option F40 provides the necessary 40 GHz components and cabling to allow your analyzer to
measure signals up to 40 GHz.
About Installing the Upgrade
Products affected . . . . . . . . . . . . . . . . . . . . . . . . . . N5230A Option 225 (20 GHz, 2-port,
configurable test set) (With serial numbers
prefixed MY4640 and above.)
Installation to be performed by . . . . . . . . . . . . . . Agilent service center or personnel
qualified by Agilent
Estimated installation time . . . . . . . . . . . . . . . . . 2.0 hours
Estimated adjustment time . . . . . . . . . . . . . . . . . 0.5 hours
Estimated full instrument calibration time . . . . 4.5 hours