Agilent Technologies M1205A V24, Service Manual

Page: 263 / 358

$JLOHQW0$996HULHV6HUYLFH*XLGH
)URQW+RXVLQJ$VVHPEO\9&9& 9&79&7
F
r
on
t H
o
u
s
in
g
A
ssem
b
ly
V
2
4C
/V
26
C
& V
2
4C
T/
V
2
6
C
T
5HPRYLQJWKH)ODW3DQHO%DFNOLJKW7XEH
When removing backlight, carefully place the Flat Panel with display side down on a clean
flat surface.
Using a jeweler size Phillips screwdriver, remove the backlight cover housing the 2 back-
light wires by unscrewing the 2 screws.
Push up on 2 tabs to release cover and slide cover forward and up to remove.
Unscrew the small screw next to the 2 backlight wires to disconnect the backlight assem-
bly from the Flat Panel.
Lift the 2 backlight wires from their channels and pull gently to remove the backlight’s
connector from the Flat Panel.
Gently slide the backlight out from its channel.
Do not touch fluorescent tube when removing or installing the backlight as oil from
fingerprints will shorten the operating life of the tube.
Now continue the disassembly procedure on page 9-12.
127(
2 tabs
Backlight Wires
Backlight Wires
127(