6
Chapter 1: Setting Up LogicWave
Installing LogicWave
Installing LogicWave
This section provides instructions for setting up the LogicWave logic
analyzer and connecting it to a device under test.
The logic analyzer user interface requires a host computer (PC) with
the following characteristics (or better):
•
Pentium 90 MHz
•
Windows 95/98/NT/2000
•
16MB RAM
•
10MB available space on the hard disk drive
•
Available parallel port (no pass-through devices installed)
•
Available LPT1 peripheral device designator
The host computer (PC) running the logic analyzer interface can be
either powered on or off. The interface software is installed on the PC.
