Agilent Technologies InfiniiVision 7000A Series, Programmer'S Manual

Page: 719 / 922

Obsolete and Discontinued Commands
7
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide 719
:MEASure:TSTArt
(see page 786 )
Command Syntax
:MEASure:TSTArt <value> [suffix]
<value> ::= time at the start marker in seconds
[suffix] ::= {s | ms | us | ns | ps}
The :MEASure:TSTArt command moves the start marker (X1 cursor) to the
specified time with respect to the trigger time.
Query Syntax
:MEASure:TSTArt?
The :MEASure:TSTArt? query returns the time at the start marker (X1
cursor).
Return Format
<value><NL>
<value> ::= time at the start marker in NR3 format
See Also
• "Introduction to :MARKer Commands" on page 296
• "Introduction to :MEASure Commands" on page 312
• ":MARKer:X1Position" on page 298
• ":MARKer:X2Position" on page 300
• ":MARKer:XDELta" on page 302
• ":MEASure:TDELta" on page 715
• ":MEASure:TSTOp" on page 720
N O T E
The short form of this command, TSTA, does not follow the defined Long Form to Short
Form Truncation Rules (see
page 788 ). The normal short form "TST" would be the same for
both TSTArt and TSTOp, so sending TST for the TSTArt command produces an error.
N O T E
The :MEASure:TSTArt command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :MARKer:X1Position command (see
page 298 ) instead.