Agilent Technologies InfiniiVision 7000A Series, Programmer'S Manual

Page: 409 / 922

Commands by Subsystem
5
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide 409
:SAVE:IMAGe:FORMat
(see page 786 )
Command Syntax
:SAVE:IMAGe:FORMat <format>
<format> ::= {TIFF | {BMP | BMP24bit} | BMP8bit | PNG}
The :SAVE:IMAGe:FORMat command sets the image format type.
Query Syntax
:SAVE:IMAGe:FORMat?
The :SAVE:IMAGe:FORMat? query returns the selected image format type.
Return Format
<format><NL>
<format> ::= {TIFF | BMP | BMP8 | PNG | NONE}
When NONE is returned, it indicates that a waveform data file format is
currently selected.
See Also
• "Introduction to :SAVE Commands" on page 404
• ":SAVE:IMAGe[:STARt]" on page 406
• ":SAVE:IMAGe:AREA" on page 407
• ":SAVE:IMAGe:FACTors" on page 408
• ":SAVE:IMAGe:INKSaver" on page 410
• ":SAVE:IMAGe:PALette" on page 411
• ":SAVE:WAVeform:FORMat" on page 417