Agilent Technologies InfiniiVision 7000A Series, Programmer'S Manual

Page: 177 / 922

Commands by Subsystem
5
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide 177
:STATus
(see page 786 )
Query Syntax
:STATus? <source>
<source> ::= {CHANnel<n> | FUNCtion | MATH | SBUS} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15 | POD{1 | 2}
| BUS{1 | 2} | FUNCtion | MATH | SBUS} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :STATus? query reports whether the channel, function, trace memory,
or serial decode bus specified by <source> is displayed.
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also • "Introduction to Root (:) Commands" on page 141
• ":BLANk" on page 148
• ":CHANnel<n>:DISPlay" on page 222
• ":DIGital<n>:DISPlay" on page 239
• ":FUNCtion:DISPlay" on page 268
• ":POD<n>:DISPlay" on page 393
• ":VIEW" on page 180
N O T E
MATH is an alias for FUNCtion.