Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 972 / 1232

972 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
32
:WGEN Commands
Query Syntax
:WGEN:FUNCtion?
The :WGEN:FUNCtion? query returns the currently selected signal type.
Return Format
<signal><NL>
<signal> ::= {SIN | SQU | RAMP | PULS | DC | NOIS | SINC | EXPR | EXPF
| CARD | GAUS | ARB}
See Also
• "Introduction to :WGEN Commands" on page 961
• ":WGEN:MODulation:NOISe" on page 976
CARDiac Use these commands to set the cardiac signal
parameters:
•
":WGEN:FREQuency" on page 969
•
":WGEN:PERiod" on page 979
•
":WGEN:VOLTage" on page 981
•
":WGEN:VOLTage:OFFSet" on page 984
100 mHz to
200 kHz 20 mVpp to
5 Vpp ±1.25 V
GAUSsian Use these commands to set the gaussian pulse
signal parameters:
•
":WGEN:FREQuency" on page 969
•
":WGEN:PERiod" on page 979
•
":WGEN:VOLTage" on page 981
•
":WGEN:VOLTage:OFFSet" on page 984
100 mHz to
5 MHz 20 mVpp to
4 Vpp ±1.25 V
ARBitrary Use these commands to set the arbitrary signal
parameters:
•
":WGEN:FREQuency" on page 969
•
":WGEN:PERiod" on page 979
•
":WGEN:VOLTage" on page 981
•
":WGEN:VOLTage:OFFSet" on page 984
•
":WGEN:VOLTage:HIGH" on page 982
•
":WGEN:VOLTage:LOW" on page 983
100 mHz to
12 MHz 20 mVpp to
5 Vpp ±2.50 V
1
When the output load is 50
Ω
, these values are halved.
Waveform
Type Characteristics Frequency
Range Max.
Amplitude
(High-Z)
1
Offset
(High-Z)
1