Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 145 / 1232

Commands Quick Reference
4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 145
n/a :WAVeform:XINCrement?
(see page 953 )
<return_value> ::= x-increment
in the current preamble in NR3
format
n/a :WAVeform:XORigin?
(see page 954 )
<return_value> ::= x-origin
value in the current preamble in
NR3 format
n/a :WAVeform:XREFerence?
(see page 955 )
<return_value> ::= 0
(x-reference value in the current
preamble in NR1 format)
n/a :WAVeform:YINCrement?
(see page 956 )
<return_value> ::= y-increment
value in the current preamble in
NR3 format
n/a :WAVeform:YORigin?
(see page 957 )
<return_value> ::= y-origin in
the current preamble in NR3
format
n/a :WAVeform:YREFerence?
(see page 958 )
<return_value> ::= y-reference
value in the current preamble in
NR1 format
Table 60 :WAVeform Commands Summary (continued)
Command Query Options and Query Returns
Table 61 :WGEN Commands Summary
Command Query Options and Query Returns
:WGEN:ARBitrary:BYTeo
rder <order> (see
page 962 )
:WGEN:ARBitrary:BYTeo
rder? (see page 962 )
<order> ::= {MSBFirst | LSBFirst}
:WGEN:ARBitrary:DATA
{<binary> | <value>,
<value> ...} (see
page 963 )
n/a <binary> ::= floating point
values between -1.0 to +1.0 in
IEEE 488.2 binary block format
<value> ::= floating point values
between -1.0 to +1.0 in
comma-separated format
n/a :WGEN:ARBitrary:DATA:
ATTRibute:POINts?
(see page 964 )
<points> ::= number of points in
NR1 format
:WGEN:ARBitrary:DATA:
CLEar (see page 965 )
n/a n/a