ICP-MS Cone Magnifier, 10X with LED Illumination
Quick Start Instructions
The magnifier is used for inspection and measurement of the ICP-MS cone orifice. Featuring ten times
magnification with LED illumination, manual focus and +/- 15 mm scaled reticle with 0.1 mm divisions.
Installing and replacing the batteries
The magnifier is supplied without any batteries due to restrictions on shipment of hazardous goods.
For operation of the LED illumination, four SR45 batteries are required. The batteries are a button type that are also
used in watches. Alternative names for the battery type required may include: AG9, SG9, LR936.
Steps Images
1
Rotate the lower half of the magnifier counter-clockwise by
holding the black ring which houses the LED light switch
(Figure 1).
Figure 1
Opening the battery compartment
2
The magnifier will unscrew in half and expose the battery
compartment into which the 4 x SR45 batteries can be installed
(Figure 2).
Figure 2
Battery compartment
3
Install the batteries with the positive (+) side facing in towards the center.
4
Once the batteries have been installed, refit the two sections of the magnifier.
