Programming Command Reference
5
N9360A Multi UE Tester GSM Programming Manual
5-163
Marker Position Control
TESTs:MANual:RESults:SMONitor:MARKer:POINt
UP|DOWN
TESTs:MANual:RESults:SMONitor:MARKer:POINt <int>
TESTs:MANual:RESults:SMONitor:MARKer:POINt?
This command moves the marker position UP or DOWN in steps,
or by
<real>
ranging from
0
to
400000
in Hz.
Measurement Result
TESTs:MANual:RESults:SMONitor?
This query command returns measurement result values
<int
1>
,
<string 2>
,
<real 3>
,
<real 4>
and
<real 5>
. Each
value is separated by a comma.
•
<int 1>
(1 digit) is
0
if measurement results are within the
measurement range, or
1
if any measurement result is out of
range or the Spectrum monitor is not measured.
The definitions and ranges of
<string 2>
(10 digits),
<real 3>
(5 letters),
<real 4>
(5 letters), and
<real 5>
(5 letters) are shown in the table below. If any measurement
result is out of range or the Spectrum monitor is not
measured, the values
9999999999
for
<string 2>
and
-99.9
for
<real 3>
,
<real 4>
and
<real 5>
, are
returned.
Table 5-41 Spectrum Monitor Measurement Result
Value
Definition
Range
<string 2> Absolute peak RF frequency [Hz] 880200000 to 915200000,
1710200000 to 1785200000,
1850200000 to 1901200000
<real 3>
Absolute peak RF level [dBm]
–99.9 to 99.9
<real 4>
Relative RF level [Hz]
–99.9 to 0.0 (at +200 kHz)
<real 5>
Relative RF level [dB]
–99.9 to 0.0 (at +250 kHz)