Agilent Technologies G7104A, User Manual

Page: 26 / 234

26 Agilent 1290 Infinity II Flexible Pump User Manual
2
Site Requirements and Specifications
Site Requirements
Bench Space
The module dimensions and weight (see Table 1 on page 27) allow you to
place the module on almost any desk or laboratory bench. It needs an
additional 2.5 cm (1.0 inches) of space on either side and approximately
8 cm (3.1 inches) in the rear for air circulation and electric connections.
If the bench shall carry a complete HPLC system, make sure that the
bench is designed to bear the weight of all modules.
The module should be operated in a horizontal position.
Condensation
C A U T I O N
Condensation within the module
Condensation can damage the system electronics.
➔
Do not store, ship or use your module under conditions where temperature
fluctuations could cause condensation within the module.
➔
If your module was shipped in cold weather, leave it in its box and allow it to warm
slowly to room temperature to avoid condensation.