1
Important Safety Warnings
Important Safety Warnings
7
Quiet Cover MS User Manual
Important Safety Warnings
Safety cautions and warnings must be observed during all phases of operation, service, and repair
of Quiet Cover MS. Failure to comply with these precautions violates safety standards of design
and Quiet Cover MS’s intended use. Agilent Technologies assumes no liability for the customer’s
failure to comply with these requirements.
WARNING
A two-person lift is required when removing the Quiet Cover MS from the packaging. Failure to
perform a two person lift may result in personal injury.
WARNING
Never run the pump without also running Quiet Cover MS.
CAUTION
While running Quiet Cover MS:
• Do not block air flow to the fan.
• Do not set items on top of Quiet Cover MS.
• It is important that the Quiet Cover MS not recirculate hot air. Always position the
Quiet Cover MS where it can draw cool air on all sides.
CAUTION
Be sure to position Quiet Cover MS so that there is plenty of room to allow access to panels and
controls.
WARNING
In the event of a temperature alarm malfunction or if the alarm has been on for an extended
period of time, the Quiet Cover MS and the pump may be dangerously hot. Check that the
Quiet Cover MS and pump are cool before you touch them.
