Agilent Technologies G1314B, User Manual

Page: 69 / 208

Agilent 1260 Infinity VWD User Manual 69
Using the Detector
4
Special Settings of the Detector
Analog Output Settings
1 To change the Output Range of the analog outputs select VWD Control .
2 To change the offset and the attenuation select VWD Signal > More .
3
Change the values if required.
Figure 26 Analog Output Settings
• Analog Output Range : can be set to either 100 mV
or 1 V full scale.
• Zero Offset :can be set to either 100 mV or 1 V full
scale.
• Attenuation Limits : 0.98 to 4000 mAU at discrete
values for either 100 mV or 1 V full scale.
Figure 27 Analog Output Settings