Agilent Technologies G1314B, User Manual

Page: 32 / 208

32 Agilent 1260 Infinity VWD User Manual
3
Installing the Detector
Unpacking the Detector
Unpacking the Detector
Damaged Packaging
If the delivery packaging shows signs of external damage, please call your
Agilent Technologies sales and service office immediately. Inform your
service representative that the instrument may have been damaged during
shipment.
Condensation
C A U T I O N
"Defective on arrival" problems
If there are signs of damage, please do not attempt to install the module. Inspection by
Agilent is required to evaluate if the instrument is in good condition or damaged.
➔
Notify your Agilent sales and service office about the damage.
➔
An Agilent service representative will inspect the instrument at your site and
initiate appropriate actions.
C A U T I O N
Condensation within the detector
Condensation will damage the system electronics.
➔
Do not store, ship or use your detector under conditions where temperature
fluctuations could cause condensation within the detector.
➔
If your detector was shipped in cold weather, leave it in its box and allow it to warm
up slowly to room temperature to avoid condensation.