Agilent Technologies FieldFox MW N9913A, Service Manual, Page: 21 / 156

N9927-90003 2-5
FieldFox Analyzer General Product Information
Analyzer Options
Option Descriptions
Option 010, Vector Network Analyzer Time Domain
With Option 010 or time domain, FieldFox computes the inverse Fourier transform of the
frequency-domain data to display reflection or transmission coefficients versus time. Time domain
gating can be used to remove unwanted responses such as connector mismatch or cable discontinuities,
and the results can be displayed in either time or frequency domain.
• Fully error-corrected time domain reflection or transmission response
• Gating available to remove unwanted responses
• View time and frequency domain data simultaneously
• Transform frequency domain to the time domain or time domain to the frequency domain
Option 030, Remote Control Capability
Option 030 adds remote control capability to FieldFox for iDevices.
• User must supply iPad, iPhone, or iPod.
• User must download free FieldFox app from App store.
Option 100, 3.5 mm APC Connectors
Option 100 provides 3.5 mm input and output connectors.
Available on N9938A model only (26.5 GHz) at initial purchase.
Option 112, QuickCal
Option 112 provides a calibration that is performed automatically using calibration standards that are
built-in to the FieldFox. Calibration standards are automatically switched in as needed. QuickCal is ideal
for making quick DTF and cable loss measurements without taking the time to perform a full O,S,L Cal.
Option 210, Vector Network Analyzer Transmission/Reflection
A base combination analyzer includes a cable and antenna analyzer.
Available on N9991x Combination models. Base option available for N9992x models only.
Option 210 adds:
• A vector network analyzer mode with transmission/reflection or S21 and S11 measurements, both
magnitude and phase. Available calibrations are CalReady, one-port OSL, response and enhanced
response.
• Insertion loss measurement to the base cable and antenna analyzer or CAT mode.
• 2-port transmission measurement to the vector voltmeter mode, available as Option 308.
• Tracking capability to the spectrum analyzer independent source, available as Option 233 (source and
spectrum analyzer set to sweep a frequency range, in sync)