Agilent Technologies FieldFox MW N9913A, Service Manual, Page: 28 / 156

3-2 N9927-90003
Tests and Adjustments FieldFox Analyzer
Information in This Chapter
Information in This Chapter
This chapter contains procedures to help you check, verify, and adjust your FieldFox analyzer.
• The checks verify the operation of the assemblies in your analyzer.
• The adjustments allow you to tune your analyzer for maximum response.
NOTE The Agilent N7841A software package is required to test and adjust your analyzer. This
software package must be purchased separately. It can be downloaded from the Internet
and a license purchased on-line, or it can be ordered on a CD-ROM. Go to
www.agilent.com/find/calibrationsoftware for further information. The help file for the
N7841A software package is also available at this URL.
Section Title Summary of Content Start Page
Before You Begin
Items to consider or procedures to perform before testing is
begun:
•
Verify the operating environment.
• Protect Against Electrostatic Discharge (ESD)
• Allow the Analyzer to Warm Up
• Review the Principles of Connector Care
Page 3-3
Service Test Equipment
A list of additional equipment recommended for servicing the
FieldFox analyzer.
Page 3-5
Before Returning an
Instrument to a Customer
A list of things to do before returning an instrument to a
customer after servicing is completed.
Page 3-6
Operational Check
An operation check that should be performed before returning
an instrument to a customer.
Page 3-7
Performance Tests
(Agilent N7841A
Software Package)
1
1. The Agilent N7841A software package must be purchased separately. Go to
www.agilent.com/find/calibrationsoftware for information.
A list of performance tests included in the Agilent N7841A
software package.
Page 3-9
Adjustments (Agilent
N7841A Software
Package)
a
A list of adjustments included in the Agilent N7841A software
package.
Page 3-10