Getting Started
Agilent Electrothermal Temperature Controller ETC 60 User’s Guide
26
Installing an Absorption Cell
To install an absorption cell:
1.
Carefully slide the black fluoroelastomer tubing onto the inlet cell stem.
Figure 28.
Black fluorelastomer tubing on the inlet cell stem
WARNING
Sharp Objects
Broken glass can cause severe cuts to hands. Handle the workhead with
care, as the sidearm of the quartz tube is fragile and easily broken.
2.
Undo the latches on the ETC 60 workhead cover and open the cover.
3.
Carefully place the cell into the workhead. Ensure that the inlet stem is located
in the groove at the front of the workhead.
Figure 29.
Cell placed in workhead
4.
Carefully close the workhead cover and secure the latches.
5.
If necessary, reoptimize the workhead position using the burner adjuster
controls.
Inlet cell stem
