manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 99 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 99

Real-Time I/Q Baseband Generator User’s and Programming Guide

3-29

ESG Family Signal Generators

Softkey Reference

Options UN8 and 202

C

Channel Number

Pressing this softkey makes channel numbers (the frame carrier
frequency) the active function based on frequency channels defined in
the active format. The output frequency depends on both the channel
band and channel number selections.

Range

Softkey Location:

Mode

 >

TDMA

 >

desired format

 >

Freq Channels

 >

Channel Number

Configure Access

Pressing this softkey displays a menu of softkeys where you can
configure an access timeslot. The following figure shows an example of
the display graphics for an access timeslot.

•

ET:

shows the hexadecimal value that the 8-bit extended tail is set

to (3A). The

ET

 softkey makes this value the active function.

•

SS:

shows the hexadecimal value that the 41-bit synchronization

sequence is set to (096FF335478). The

SS

 softkey makes this value

the active function.

DECT: 0 through 9

PDC: 1 through 320

EDGE and GSM: 1 through 124

PHS: 1 through 77

NADC: 1 through 1023

TETRA: 1 through 100

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments