manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 78 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 78

3-8

Real-Time I/Q Baseband Generator User’s and Programming Guide

Softkey Reference

ESG Family Signal Generators

Numerics

Options UN8 and 202

8-Lvl FSK

This softkey appears in two different situations, enabling you to either
select a modulation, or load a default pattern into the FSK table editor.

Selecting an 8-level FSK Modulation

Press this softkey to select 8–level FSK (frequency shift keying) for
modulating a continuous stream of the selected data pattern.
Eight–level FSK modulation transmits data at the rate of 3 bits per
symbol. The selected modulation appears in the

Mod Type

 field in the

text area of the display, and under the

Select

softkey in the Modulation

Type menu.

Softkey Locations

Custom:

Mode

 >

Custom

 >

Modulation Type

 >

Select

 >

FSK

 >

8-Lvl FSK

Other Formats:

Mode

>

TDMA

>

desired format

>

Modify Standard

>

Modulation Type

>

Select

>

FSK

>

8-Lvl FSK

Loading an 8–Level FSK Pattern into the FSK Table Editor

Press this softkey to load a 8–level FSK (frequency shift keying)
modulation pattern into the FSK table editor. Eight–level FSK
modulation transmits data at the rate of 3 bits per symbol. For details
on using the FSK table editor, see “

Building a Customized FSK

Modulation with the FSK Table Editor

” on page 2 -22.

Softkey Locations

Custom:

Mode

 >

Custom

 >

Modulation Type

 >

Define User FSK

 >

Load Default FSK

 >

8-Lvl FSK

Other Formats:

Mode

>

TDMA

>

desired format

>

Modify Standard

>

Modulation Type

>

Define User FSK

>

Load Default FSK

>

8-Lvl FSK

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments