manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 291 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 291

Real-Time I/Q Baseband Generator User’s and Programming Guide

4-47

ESG Family Signal Generators

Programming Commands and Examples

Options UN8 and 202

Programming Commands

NADC - Uplink Custom Timeslot

[SOURce]:RADio[:NADC]:SLOT[1]|2|3|4|5|6:UCUSTom:FIX4 <0-15>

[SOURce]:RADio[:NADC]:SLOT[1]|2|3|4|5|6:UCUSTom:FIX4?

This command enables you to select a binary, 4-bit repeating sequence data pattern to be
used in the selected uplink custom timeslot.

FIX4

must already be defined as the data type.

Range: 0000 to 1111

*RST value: 0000

NADC - Uplink Traffic Channel Timeslot

[SOURce]:RADio[:NADC]:SLOT[1]|2|3|4|5|6:UTCHannel[:DATA]:FIX4 <0-15>

[SOURce]:RADio[:NADC]:SLOT[1]|2|3|4|5|6:UTCHannel[:DATA]:FIX4?

This command enables you to select a binary, 4-bit repeating sequence data pattern to be
used in the selected uplink traffic channel timeslot.

FIX4

 must already be defined as the

data type.

Range: 0000 to 1111

*RST value: 0000

PDC - Unframed Data Transmission

[:SOURce]:RADio:PDC:DATA:FIX4 <0-15>

[:SOURce]:RADio:PDC:DATA:FIX4?

This command enables you to select a binary, 4-bit repeating sequence data pattern for
unframed transmission according to the protocols (modulation type, symbol rate, filter, and
burst shape) selected for the PDC format.

FIX4

 must already be defined as the data type.

Range: 0000 to 1111

*RST value: 0000

PDC - Downlink Custom Timeslot

[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:DCUSTom:FIX4 <0-15>

[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:DCUSTom:FIX4?

This command enables you to select a binary, 4-bit repeating sequence data pattern to be
used in the selected downlink custom timeslot.

FIX4

 must already be defined as the data

type.

Range: 0000 to 1111

*RST value: 0000

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments