manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 274 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 274

4-30

Real-Time I/Q Baseband Generator User’s and Programming Guide

Programming Commands and Examples

ESG Family Signal Generators

Programming Commands

Options UN8 and 202

TETRA

[:SOURce]:RADio:TETRa:DATA PN9|PN11|PN15|PN20|PN23|FIX4|

"<file name>"|EXT|P4|P8|P16|P32|P64

[:SOURce]:RADio:TETRA:DATA?

This command sets a data pattern for unframed transmission:

PN9 through PN23

Pseudorandom bit pattern

FIX4

4-bit repeating sequence data pattern

"<file name>"

A file in the catalog of binary files

Ext

External input data pattern

P4

Four 1’s and four 0’s

P8

Eight 1’s and eight 0’s

P16

Sixteen 1’s and sixteen 0’s

P32

Thirty-two 1’s and thirty-two 0’s

P64

Sixty-four 1’s and sixty-four 0’s

NOTE

Pattern Repeat and Pattern Trigger functions are not available if you use
either a PN data sequence, or an external data source.

*RST value:

• Custom, DECT, GSM, NADC, PDC, PHS, TETRA: PN23
• EDGE: PN9

Data Out

[:SOURce]:RADio:EDGE:BNCMux:DOUT MDATa|EDATa

[:SOURce]:RADio:EDGE:BNCMux:DOUT?

This command sets the output of the DATA OUT rear panel BNC/SMB connector.

*RST value: MDATa

Default State

[:SOURce]:RADio:<desired format>:DEFault

This command returns all of the digital modulation format parameters to their default
conditions. It does not affect any other instrument state parameters.

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments