manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 256 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 256

4-12

Real-Time I/Q Baseband Generator User’s and Programming Guide

Programming Commands and Examples

ESG Family Signal Generators

Programming Commands

Options UN8 and 202

Burst Rise Time

[:SOURce]:RADio:CUSTom:BURSt:SHAPe:RISE:TIME <value>

[:SOURce]:RADio:CUSTom:BURSt:SHAPe:RISE:TIME?

[:SOURce]:RADio:CUSTom:BURSt:SHAPe:RTIMe <value>

[:SOURce]:RADio:CUSTom:BURSt:SHAPe:RTIMe?

[:SOURce]:RADio:<desired format>:BURSt:SHAPe:RISE:TIME <value>

[:SOURce]:RADio:<desired format>:BURSt:SHAPe:RISE:TIME?

[:SOURce]:RADio:<desired format>:BURSt:SHAPe:RTIMe <value>

[:SOURce]:RADio:<desired format>:BURSt:SHAPe:RTIMe?

This command sets the burst shape rise time.

Range: minimum and maximum values depend upon modulation type and symbol rate.

*RST value:

• Custom: 5.860
• DECT: 13.797 bits
• EDGE: 12.700 bits
• GSM: 4.224 bits
• NADC: 5.860 bits
• PDC: 5.470 bits
• PHS: 4.976 bits
• TETRA: 9.376 bits

PN9 Mode

[:SOURce]:RADio:<desired format>

1

:BURSt:PN9 NORMal|QUICk

[:SOURce]:RADio:<desired format>

1

:BURSt:PN9?

1

All formats except EDGE.

This command controls the software PN9 generation. Normal mode produces a maximal
length PN9 sequence. Quick mode produces a truncated PN9 sequence. Use Normal mode
for bit-error-rate tests where a maximal length PN9 sequence is required.

*RST value: Normal

Cell Station Identification Code (CSID) Field

[SOURce]:RADio:PHS:DLINK:SLOT[1]|2|3|4:SCHannel:CSID <bit pattern>

[SOURce]:RADio:PHS:DLINK:SLOT[1]|2|3|4:SCHannel:CSID?

[SOURce]:RADio:PHS:ULINK:SLOT[1]|2|3|4:SCHannel:CSID <bit pattern>

[SOURce]:RADio:PHS:ULINK:SLOT[1]|2|3|4:SCHannel:CSID?

This command enables you to change the 42-bit cell station identification code (CSID) field.
The preset hexadecimal value (when normal preset is selected) for CSID reflects the PHS
protocol, however you can enter a new value with this command. The current value for
CSID is displayed in the

CSID

 field near the bottom of the text area of the display.

Range: 00000000000 to 3FFFFFFFFFF (hexadecimal)

*RST value: 20200020001

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments