manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 253 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 253

Real-Time I/Q Baseband Generator User’s and Programming Guide

4-9

ESG Family Signal Generators

Programming Commands and Examples

Options UN8 and 202

Programming Commands

Burst Configuration - State, Type, Rise/Fall Time, Rise/Fall Delay,
PN9 Mode

Burst State

[:SOURce]:RADio:<desired format>:BURSt[:STATe] ON|OFF|1|0

[:SOURce]:RADio:<desired format>:BURSt[:STATe]?

This command enables and disables the burst function. The choices are On (1) or Off (0).
Activating the burst transmits framed data. This means that you will be bursting the
timeslots that are on and there will be no RF carrier during the off timeslots.

NOTE

This is true for all up traffic channels and for custom timeslots. However, if
you have switched on any timeslot that you have configured as a down traffic
channel, the RF signal is not switched off between timeslots and the off
timeslots are transmitted as a continuous series of ones for the time period of
the off timeslots. Switching the burst state off allows modulation of
pseudo-random sequences, user files, 4-bit patterns, or clocked data.

*RST value: Off

Burst Shape Type

[:SOURce]:RADio:CUSTom:BURSt:SHAPe[:TYPE] SINE|"<file name>"

[:SOURce]:RADio:CUSTOm:BURSt:SHAPe[:TYPE]?

[:SOURce]:RADio:<desired format>:BURSt:SHAPe[:TYPE] SINE|"<file name>"

[:SOURce]:RADio:<desired format>:BURSt:SHAPe[:TYPE]?

This command lets you specify the burst shape as either

SINE

 or a user-defined file

(

"<file name>"

). User files must first be downloaded into signal generator memory before

they can be selected.

*RST value: Sine

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments