manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 239

Real-Time I/Q Baseband Generator User’s and Programming Guide

3-169

ESG Family Signal Generators

Softkey Reference

Options UN8 and 202

U

Up Normal

Press this softkey to select uplink normal as the timeslot type for the
active timeslot.

You cannot mix uplink and downlink timeslots. If a timeslot is
designated as downlink, it changes to uplink if you designate any other
timeslot as uplink. The following table shows the timeslot type
interchange to a frame designated as downlink when uplink is selected.

When you select

Up Normal

 for a timeslot, the visual representation of

the timeslot pattern updates.

Softkey Location:

Mode

>

TDMA

>

TETRA

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

Up Normal

Up TCH

Press this softkey to select uplink traffic channel (mobile to base
station) as the timeslot type for the active timeslot. Uplink timeslots
cannot be mixed with downlink timeslots. If you already have any
timeslots designated as downlink, they will be changed to uplink when
any other timeslot is designated as uplink.

When you select

Up TCH

 for a timeslot, the visual representation of the

timeslot pattern updates.

NADC and PDC:

Mode

>

TDMA

>

desired format

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

Up TCH

Up TCH All

Press this softkey to select uplink traffic channel (mobile to base
station) as the timeslot type for all timeslots. When you select

Up TCH

,

the frame pattern is bursted with RF power turning off during off
timeslots.

When you select

Up TCH All

, the visual representation of the timeslot

pattern updates.

NADC and PDC:

Mode

>

TDMA

>

desired format

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

Up TCH All

From Continuous

Downlink Timeslot

From Discontinuous

Downlink Timeslot

To Uplink

Timeslot

Dn Custom Cont

Dn Custom Disc

Up Custom

Dn Normal Cont

Dn Normal Disc

Up Normal

Dn Sync Cont

Dn Sync Disc

Up Custom

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands