manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 229 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 229

Real-Time I/Q Baseband Generator User’s and Programming Guide

3-159

ESG Family Signal Generators

Softkey Reference

Options UN8 and 202

T

TCH All

Press this softkey to select traffic channel as the timeslot type for all
timeslots in either the uplink or the downlink channel, depending on
which is active.

When you select

Up TCH All

, the visual representation of the timeslot

pattern on the display immediately updates.

Softkey Location:

Mode

>

TDMA

>

PHS

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

TCH All

Or:

Mode

>

TDMA

>

PHS

>

Data Format Pattern Framed

>

Configure Timeslots

>

Control Channel Dnlink Uplink

>

Timeslot Type

>

TCH All

TCH/FS

Use this softkey to select a full rate speech traffic channel as the
timeslot type for the active timeslot.

Softkey Location:

Mode

>

TDMA

>

GSM

>

Data Format Pattern Framed

>

Configure Timeslots

>

Configure Normal

>

E

>

Multiframe Channel

>

TCH/FS

TDMA

Pressing this softkey reveals a menu of softkeys for generating data
patterns that are formatted into a framed structure (where the data
bits are located in fields defined by the individual TDMA protocols) or
for generating just the data pattern where the data sequence can be
output a single time or repeatedly.

Softkey Location:

Mode

>

TDMA

TETRA

Pressing this softkey opens a menu of softkeys where you can generate
a data pattern formatted into either a framed structure (where the data
bits are located in fields defined by the TETRA protocol) or a sequence
that can be output one or more times.

Softkey Location:

Mode

>

TDMA

>

TETRA

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments