Agilent Technologies ESG series Page 204 User And Programming Manual Download

Page: 204 / 446

3-134

Real-Time I/Q Baseband Generator User’s and Programming Guide

Softkey Reference

ESG Family Signal Generators

Options UN8 and 202

PHS:

Mode

TDMA

PHS

Data Format Pattern Framed

Configure Timeslots

Configure TCH

TCH

PN Sequence

PN20

is also located in the Data menu found in the uplink Configure

TCH menu, and in the downlink and uplink Configure Custom
menus.

TETRA:

Mode

TDMA

TETRA

Data Format Pattern Framed

Configure Timeslots

Configure Up Normal

Data

PN Sequence

PN20

is also located in the uplink and downlink Configure Custom

menus, and in the Data menus found in every other TETRA
Configure Timeslots menu.

PN23

Press this softkey to select an internally-generated PN23
pseudorandom bit pattern.

For unframed transmissions,

PN23

appears in the

Data

field in the top

line of the text area of the display.

For framed timeslot data fields,

PN23

appears in the

Data

field or the

field, both of which are located near the bottom of the text area of the
display.

For configuring the timeslot data fields,

PN23

appears in either the

Data

field (all formats) or the

•

field (DECT)

•

field (EDGE and GSM)

•

TCH

field (PDC and PHS)

Softkey Locations

Custom:

Mode

Custom

Data

PN Sequence

PN23

Other Formats:

Mode

TDMA

desired format

Data

PN Sequence

PN23

DECT:

Mode

TDMA

DECT

Data Format Pattern Framed

Configure Timeslots

Configure Traffic Bearer

B field

PN Sequence

PN23

is also located in the B field menus found in the portable part

Configure Traffic Bearer menu and the radio fixed part and portable
part Low Capacity menus, and also in the radio fixed part and
portable part Configure Custom menus.

GSM:

Mode

TDMA

GSM

Data Format Pattern Framed

Configure Timeslots

Configure Up Normal

PN Sequence

PN23

is also located in the Configure Custom menu, and in the E

menus found in the Configure Sync and Configure Access menus.

NADC:

Mode

TDMA

NADC

Data Format Pattern Framed

Configure Timeslots

Configure Up TCH

Data

PN Sequence

PN23

Summary of Contents for ESG series































































































































































































































































































































































































































































Search results

Summary of Contents for ESG series

Reviews:

Related manuals for ESG series

Brands by name

Popular brands

Agilent Technologies ESG series, User And Programming Manual

Search results

Summary of Contents for ESG series

Reviews:

Related manuals for ESG series

Brands by name

Popular brands