manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 196 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 196

3-126

Real-Time I/Q Baseband Generator User’s and Programming Guide

Softkey Reference

ESG Family Signal Generators

P

Options UN8 and 202

P

Page Down

Pressing this softkey displays the next page of entries.

Page Down

 is

located in the table editor menus and in the catalogs of files.

Page Up

Pressing this softkey displays the previous page of entries.

Page Up

 is

located in the table editor menus and in the catalogs of files.

Pattern Repeat Single Cont

Press this softkey to toggle the data pattern repeat from single to
continuous. Notice that your selection appears after

Repeat

 in the text

display. After preset, the instrument default is continuous. Toggling
pattern repeat to single, enables the

Pattern Trigger

 softkey.

NOTE

Pattern Repeat and Pattern Trigger functions are not available if you
use either a PN data sequence, or an external data source.

Default Value: Continuous

Softkey Locations

Custom:

Mode

>

Custom

>

Pattern Repeat Single Cont

Other Formats:

Mode

>

TDMA

>

desired format

>

Pattern Repeat

Single Cont

Pattern Trigger

Press this softkey to display a menu of keys for triggering an unframed
modulated data pattern. The selection (Trigger Key, Bus, or Ext)
appears under the

Pattern Trigger

 softkey.

Pattern triggering is active only when the

Pattern Repeat Single Cont

softkey is set to single.

NOTE

Pattern Repeat and Pattern Trigger functions are not available if you
use either a PN data sequence, or an external data source.

Default Value: Trigger key

Softkey Locations

Custom:

Mode

>

Custom

>

Pattern Repeat Single

>

Pattern Trigger

Other Formats:

Mode

>

TDMA

>

desired format

>

Pattern Repeat Single

Cont

>

Pattern Trigger

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments