manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 151 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 151

Real-Time I/Q Baseband Generator User’s and Programming Guide

3-81

ESG Family Signal Generators

Softkey Reference

Options UN8 and 202

D

Down TCH All

Press this softkey to select downlink traffic channel (base station to
mobile) as the timeslot type for all timeslots. When you select

Down TCH All

, the frame pattern is output with continuous RF power.

Power is on during off timeslots (according to the standard) and a
continuous pattern of binary ones is sent during off timeslots. When all
of the timeslots are off, RF power is off.

When you select

Down TCH All

, the visual representation of the timeslot

pattern updates.

Softkey Locations

NADC and PDC:

Mode

>

TDMA

>

desired format

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

Down TCH All

Dummy

Press this softkey to select dummy as the timeslot type for the active
timeslot. The dummy burst is used as filler information for unused
timeslots on the forward link.

When you select

Dummy

 for a timeslot, the visual representation of the

timeslot pattern updates.

Softkey Location:

Mode

>

TDMA

>

GSM

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

Dummy

Dummy Bearer 1

Press this softkey to select dummy bearer 1 as the timeslot type for the
active timeslot. When you have selected

Dummy Bearer 1

 for a timeslot,

the visual representation of the timeslot type updates.

Softkey Location:

Mode

>

TDMA

>

DECT

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

Dummy Bearer 1

Dummy Bearer 2

Press this softkey to select dummy bearer 2 as the timeslot type for the
active timeslot. When you have selected

Dummy Bearer 2

 for a timeslot,

the visual representation of the timeslot type on the display updates.

Softkey Location:

Mode

>

TDMA

>

DECT

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

Dummy Bearer 2

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments