manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 107 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 107

Real-Time I/Q Baseband Generator User’s and Programming Guide

3-37

ESG Family Signal Generators

Softkey Reference

Options UN8 and 202

C

•

Data:

shows the data selection (PN9) for the 216-bit data field.

Other selections include PN15, fixed 4-bit patterns, fixed patterns of
ones and zeroes, user files, or external data.

•

TS3:

shows that this 10-bit training sequence field always contains

hexadecimal 2DC. The grey text in this field indicates that you
cannot change it.

Softkey Location:

Mode

>

TDMA

>

TETRA

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

 >

Dn Sync Cont

 >

Configure Dn Sync Cont

Configure Dn Sync Disc

Pressing this softkey displays a menu of softkeys where you can
configure a timeslot as a downlink discontinuous synchronization
timeslot. The following figure shows each field of the timeslot as it is
defined by the TETRA format.

•

R:

ramp time is a 10-bit field. The grey text in this field indicates

that you cannot change its value.

•

TS1:

shows that this 2-bit training sequence field always contains

hexadecimal 1. The grey text in this field indicates that you cannot
change it.

•

PA:

there are two 2-bit phase adjustment fields. The grey text

indicates that you cannot change the contents of these fields.

•

FCOR:

shows the contents (hexadecimal FF0000000000000000FF)

of the 80-bit frequency correction field. The

FCOR

softkey makes this

the active function

•

SSB:

shows the contents (hexadecimal

000000000000000000000000000000) of the 120-bit synchronization
block bits field. The

SSB

 softkey makes this the active function.

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments