manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 104 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 104

3-34

Real-Time I/Q Baseband Generator User’s and Programming Guide

Softkey Reference

ESG Family Signal Generators

C

Options UN8 and 202

Configure Dn Normal Cont

Pressing this softkey displays a menu of softkeys where you can
configure a timeslot as a downlink continuous normal timeslot. The
display in the following figure shows each field of the timeslot as it is
defined by the TETRA format.

•

TS1:

shows that the 12-bit training sequence field always contains

hexadecimal 1AD. The grey text in this field indicates that you
cannot change it.

•

PA:

there are two 2-bit phase adjustment fields. The grey text in

these fields indicates that you cannot change their content.

•

Data:

shows the data selection (PN9) for both 216-bit data fields.

Other selections include PN15, fixed 4-bit patterns, fixed patterns of
ones and zeroes, user files, or external data.

•

B1:

shows the contents of the 14-bit broadcast bits field

(hexadecimal 0000). The

B1

 softkey makes this the active function.

•

TS2:

shows the contents (hexadecimal 343A74) of the 22-bit training

sequence field. The

TS

 softkey makes this the active function.

•

B2:

shows contents (hexadecimal 0000) of the 16-bit broadcast bits

field. The

B2

 softkey makes this the active function.

•

TS3:

shows the contents (hexadecimal 2DC) of the 10-bit training

field. The grey text in this field indicates that you cannot change it.

Softkey Location:

Mode

>

TDMA

>

TETRA

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

 >

Dn Normal Cont

 >

Configure Dn Normal Cont

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments