manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 422 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 422

6-6

Real-Time I/Q Baseband Generator User’s and Programming Guide

Theory of Operation

ESG Family Signal Generators

Burst Shape: The Effects of Symbol Rate & Modulation Type

Options UN8 and 202

Burst Shape:
The Effects of Symbol Rate & Modulation Type

Burst shape maximum rise and fall time values are affected by the following factors:

• the symbol rate

• the modulation type

When the rise and fall delays equal 0, the burst shape is attempting to synchronize the
maximum burst shape power to the beginning of the first valid symbol and the ending of
the last valid symbol of the timeslot. The following figure illustrates a bursted signal in an
EDGE frame with a rise delay of 0 and a fall delay of +1 bit.

The signal generator firmware computes optimum burst shape based on the settings
you’ve chosen for modulation. You can further optimize burst shape by lining up the data
portion with the modulation. For example, if you’re designing a new modulation scheme,
do the following:

• Adjust the modulation and filtering to set the spectrum you want.

• Turn on framing.

• Adjust the burst rise and fall delay and rise and fall time for the timeslots.

If you find that the error vector magnitude (EVM) or adjacent channel power (ACP)

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments