manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 337 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 337

Real-Time I/Q Baseband Generator User’s and Programming Guide

4-93

ESG Family Signal Generators

Programming Commands and Examples

Options UN8 and 202

Programming Examples

Program Comments

10 to 160:

Title and program description

170:

Assigns the signal generator’s GPIB address to a variable.

180 to 200:

Sets the signal generator in LOCAL mode, and clears the controller’s display.

210:

Sets the signal generator to a defined state for programming.

220:

Clears the signal generator’s Status Byte Register.

230:

Program border

240:

Sets the signal generator’s output carrier frequency to 1.89515 GHz.

250:

Sets the signal generator’s output carrier power to 40 dBuV.

260:

Turns on frame burst.

270:

Configures the downlink timeslot 1 as a traffic channel type.

280:

Turns on timeslot 1.

290:

Program border

300:

Enables PHS modulation.

310:

Program border

320:

Turns on the RF output power.

330:

Program border

340:

Returns the signal generator to LOCAL mode.

350 to 370:

Prints a message to the controller’s display.

380:

Waits 5 seconds.

390 to 410:

Prints a message to the controller’s display.

420:

Waits 5 seconds.

430:

Prints a message to the controller’s display.

440:

Ends the program.

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments