manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 312 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 312

4-68

Real-Time I/Q Baseband Generator User’s and Programming Guide

Programming Commands and Examples

ESG Family Signal Generators

Programming Commands

Options UN8 and 202

Secondary Frame Configuration - Recall, Save, Trigger, State

Recall Secondary Frame

[:SOURce]:RADio:<desired format>:SECondary:RECall

This command recalls the secondary frame instrument state, overwriting the current
instrument state.

Save Secondary Frame

[:SOURce]:RADio:<desired format>:SECondary:SAVE

This command saves the current instrument state as the instrument state to use to
generate the secondary frame pattern when the secondary frame state is activated. The
file is saved under the name

<FORMAT>_SECONDARY_FRAME

.

Secondary Frame Trigger Source

[:SOURce]:RADio:<desired format>:SECondary:TRIGger[:SOURce] KEY|EXT|BUS

[:SOURce]:RADio:<desired format>:SECondary:TRIGger[:SOURce]?

This command selects the type of triggering for the secondary frame. The choices are Key
(trigger using the front panel

Trigger

 key), Ext (trigger using an external trigger supplied

to the TRIGGER IN connector), or Bus (trigger with a command sent over GPIB).

*RST value: Key

Secondary Frame State

[:SOURce]:RADio:<desired format>:SECondary[:STATe] ON|OFF|1|0

[:SOURce]:RADio:<desired format>:SECondary[:STATe]?

This command enables and disables the secondary frame function. The choices are On (1)
or Off (0).

*RST value: Off

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments