manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 220 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 220

3-150

Real-Time I/Q Baseband Generator User’s and Programming Guide

Softkey Reference

ESG Family Signal Generators

S

Options UN8 and 202

Scramble Seed

Press this softkey to make scramble seed the active function. Scramble
seed specifies the scramble starting point in the PRBS generator. Enter
values in hexadecimal.

In the TETRA format, the 32-bit scramble seed comprises four fields.
The two least significant bits are defined by the TETRA format as 1
(but you must input them anyway). The remaining 30 bits are the
extended color code that is divided into three fields:

• mobile country code
• mobile network code
• color code

The two least-significant bits are appended to the color code, so if, for
example, you set a color code of 1, a scramble seed of 7 is required.

Range (hexadecimal)

PHS: 000 through 3FF

TETRA: 00000000 through FFFFFFFF

Default Values

PHS: 3FF

TETRA: FFFFFFFF

PHS and TETRA:

Mode

>

TDMA

>

desired format

>

Data Format Pattern Framed

>

Configure Timeslots

>

Configure Frame

>

Scramble Seed

Secondary Frame Off On

Press this softkey to toggle the secondary frame operating state. The
secondary frame is a data pattern that coexists with the primary (the
pattern that can be modified either from the front panel or by using
SCPI commands). The secondary pattern is generated from the
instrument state saved using the

Save Secondary State

 softkey.

Default Value: Off

Softkey Location:

Mode

>

TDMA

>

desired format

>

Data Format Pattern Framed

>

Configure Timeslots

>

Configure Frame

>

Secondary Frame Off On

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments