manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 155 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 155

Real-Time I/Q Baseband Generator User’s and Programming Guide

3-85

ESG Family Signal Generators

Softkey Reference

Options UN8 and 202

D

Edit File

 >

Copy File

 >

Editing Keys

Editing Keys

 is also located under

Rename

Edit Item

Press this softkey to select the highlighted value for editing in the
current table editor. After you select the item this way, you can use the
front panel RPG and arrow keys to edit the value.

Edit Item

 is located in table editor menus.

Edit Rise Shape

When editing a burst shape, press this softkey to make the Rise Shape
Editor the active function.

Note that this softkey is available when the Fall Shape Editor is the
active function; when the Rise Shape Editor is the active function, this
softkey toggles to

Edit Fall Shape

.

For information on using this feature, see “

Customizing the Burst

Shape

” on page 2-7.

Softkey Locations

Custom:

Mode

>

Custom

>

Burst Shape

>

Define User Burst Shape

 >

Edit Fall Shape

 >

Edit Rise Shape

EDGE or GSM:

Mode

>

TDMA

>

desired format

>

Modify Standard

>

Burst Shape

>

Define User Burst Shape

 >

Edit Fall Shape

 >

Edit Rise Shape

ET

Press this softkey to make the 8-bit extended tail field (ET) the active
function. The default hexadecimal value reflects the GSM format; the
current value for ET appears in the

ET

 field near the bottom of the text

area of the display.

Default Value: 3A

Softkey Location:

Mode

>

TDMA

>

GSM

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

Access

>

Configure Access

>

ET

Event 1

This key accesses a menu from which you can select the output signal of
the EVENT 1 rear panel BNC/SMB connector.

Default Value: Multiframe Trigger

Softkey Location:

Mode

 >

TDMA

 >

EDGE (Rev 8.3.0 Release 1999)

>

BNC MUX Settings

 >

Event 1

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments