Agilent Technologies ESG series Page 143 User And Programming Manual Download

Page: 143 / 446

Real-Time I/Q Baseband Generator User’s and Programming Guide

3-73

ESG Family Signal Generators

Softkey Reference

Options UN8 and 202

Delete Bits

Press this softkey to delete the specified number of bits from the
currently highlighted position.

Delete Bits

is located in the Bit File Editor menus.

Delete Row

Press this softkey to delete the highlighted row in a table editor.

Delete Row

is located in the table editor menus.

Delete to Beginning

Press this softkey to delete all bits from the currently highlighted bit to
the beginning of the file.

Delete to Beginning

is located in the Bit File Editor menus.

Delete to End

Press this softkey to delete all bits from the currently highlighted bit to
the end of the file.

Delete to End

is located in the Bit File Editor menus.

Diff Data Encode Off On

Press this softkey to change the operational state of the signal
generator’s differential data encoding.

For a detailed explanation of differential data encoding, see
“

Understanding Differential Data Encoding

” on page 6-10.

Softkey Locations

Custom:

Mode

Custom

Diff Data Encode Off On

GSM:

Mode

TDMA

GSM

Modify Standard

Diff Data Encode Off On

Differential Encoding Off On

Press this softkey to change the operational state of the user-defined
Differential Encoding.

For a detailed explanation of differential encoding, see “

Understanding

Differential Encoding

” on page 6-11.

For information on using the Differential State Map editor, see
“

Mapping Custom Differential Encoding

” on page 2 -11.

Softkey Locations

Custom:

Mode

Custom

Modulation Type

Define User I/Q

Differential Encoding Off On

Summary of Contents for ESG series































































































































































































































































































































































































































































Search results

Summary of Contents for ESG series

Reviews:

Related manuals for ESG series

Brands by name

Popular brands

Agilent Technologies ESG series, User And Programming Manual

Search results

Summary of Contents for ESG series

Reviews:

Related manuals for ESG series

Brands by name

Popular brands