Agilent Technologies ESG series Page 138 User And Programming Manual Download

Page: 138 / 446

3-68

Real-Time I/Q Baseband Generator User’s and Programming Guide

Softkey Reference

ESG Family Signal Generators

Options UN8 and 202

Data Format Pattern Framed

Press this softkey to toggle the data between pattern and framed mode.

Data Format Pattern

transmits a continuous stream of the selected data

pattern (for information on selecting patterns, see “

Data

” on page 3-66).

Data Format Framed

transmits a framed data pattern in the current

format.

The

Data Format Pattern Framed

softkey is coupled to the

Burst Envelope Off On

softkey in the I/Q menu. When the data format is

on, and

Data Format Framed

is selected, the

ENVLP

annunciator appears

in the display (indicating that

Burst Envelope On

is also selected).

The following figure shows the display graphics for one of the formats.
The timeslot pattern is displayed only when

Data Format Pattern Framed

is set to

Framed

The visual representation of the timeslot pattern shows which timeslots
are on (active). Any configuration changes apply to the active timeslots.

•

DECT On

(or other active format) this field shows whether the

selected format is enabled (on) or not (off). In this example, the
format is DECT.

•

Data Format:

displays the selected type of transmission (framed or

pattern).

•

Mod Type:

displays the currently selected (2-Lvl FSK) type of

internally-generated modulation.

•

DECT:

indicates whether the current structure of the DECT

transmission follows DECT protocol (format) or not (modified).

Summary of Contents for ESG series































































































































































































































































































































































































































































Search results

Summary of Contents for ESG series

Reviews:

Related manuals for ESG series

Brands by name

Popular brands

Agilent Technologies ESG series, User And Programming Manual

Search results

Summary of Contents for ESG series

Reviews:

Related manuals for ESG series

Brands by name

Popular brands